Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Newton, MA

Wood Garage Door Repair in Newton, MA

Rotted, warped or split wood sections repaired, sealed and rebalanced. Typical cost $200-$700.

Our wood garage door repair service in Newton, MA comes down to three things: a clear diagnosis, the right parts on the truck, and a door that is balanced and safety-tested when we finish. Rotted, warped or split wood sections repaired, sealed and rebalanced.

Is it time for wood garage door repair?

  • Soft, rotted wood along the bottom section
  • Warped panels that bind in the track
  • Peeling finish and splitting boards
  • The door has become heavier from absorbed moisture

Common causes

  • Moisture getting into unsealed wood
  • Sun breaking down the finish
  • A failed bottom seal letting water wick up

What you can check yourself

  • Probe the bottom edge gently with a screwdriver. Soft wood means rot.
  • Look for peeling finish on the sun-facing side.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

Our wood garage door repair process

  1. Assess rot, warping and finish condition
  2. Repair or replace damaged sections
  3. Seal or refinish the exposed wood
  4. Rebalance the springs for the door's current weight
  5. Replace the bottom seal

Typical wood garage door repair prices

$200-$700Typical range, parts & labor
1-3 hoursTypical time on site

What moves the price:

  • Door size and weight (single or double, steel or wood)
  • Which parts need replacing and whether they are in stock
  • Spring type and cycle rating
  • Emergency or after-hours timing

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Serving Newton, MA and nearby towns

Freeze-thaw cycles and summer storms in Massachusetts are hard on the bottom panel, where water collects and rust or rot starts first.

Technicians serve all of Newton (ZIP code 02458), plus Newtonville (0.9 mi), Newton Highlands (1.2 mi), West Newton (1.5 mi) and Newton Upper Falls (1.7 mi). Call (833) 435-8883 to book a visit in Newton.

Wood Garage Door Repair: frequently asked questions

How much does wood garage door repair cost in Newton, MA?

Wood Garage Door Repair typically costs $200-$700 including parts and labor, and usually takes 1-3 hours. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do wood garage door repair the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is wood garage door repair covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where Massachusetts or Newton requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my garage door?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the garage door is near the end of its life, replace it. A garage door typically lasts 15 to 30 years. If several panels are damaged, the door is rusted through or rotted, or parts are discontinued, replacing it is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Newton, MA

Emergency Garage Door Repair

Priority service when your door is stuck open, off track or won't close.

Typical $175-$500

Insulated Garage Door Installation

Polystyrene and polyurethane insulated doors that cut noise and temperature swings.

Typical $1,500-$5,000

Cornell Cookson Rolling Fire Door Inspection & Drop Testing

Cornell Cookson makes rolling steel service doors, security grilles and rolling fire doors.

Typical $150-$500

Ryobi Remote & Keypad Programming

Ryobi's garage door opener can use the brand's 18V ONE+ batteries as backup power and has accessory ports for add-ons.

Typical $50-$150

Stanley Garage Door Sensor Repair

Stanley garage door openers are no longer made. Compatible remotes and some parts are still available for older units.

Typical $100-$250

Raynor Torsion Spring Replacement

Raynor, based in Dixon, Illinois, makes residential and commercial garage doors as well as openers.

Typical $200-$450

Overhead Door Commercial Garage Door Repair

Repairs for commercial sectional, overhead and service doors.

Typical $250-$1,000

Sommer Remote & Keypad Programming

Sommer openers, made in Germany, put the motor on a carriage that travels along the rail instead of hanging from the ceiling, so servicing them is a little different from a conventional opener.

Typical $50-$150

Garage Door Hinge Replacement

Cracked or loose hinges replaced so panels stay aligned and quiet.

Typical $100-$250

Commercial Garage Door Repair

Repairs for commercial sectional, overhead and service doors.

Typical $250-$1,000

Overhead Door Garage Door Repair

Overhead Door traces its roots to C.G. Johnson, who invented the upward-acting garage door in 1921. The company builds residential and commercial doors and openers.

Typical $150-$450

Stanley Opener Gear & Sprocket Replacement

Stanley garage door openers are no longer made. Compatible remotes and some parts are still available for older units.

Typical $125-$275

Garage door stuck, noisy or broken?

Talk to a garage door technician in Newton, MA now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote